Induction heating double station automatic welding equipment

Double station distributor welding machine / refrigeration HVAC industry distributor welding equipment
Advantages and features:
■ Quality: Eliminate hidden dangers of soldering, improve the qualification rate of soldering once, and improve the appearance of welds
■ Efficiency: High-frequency brazing is more than 30% more efficient than manual welding, efficient and fast.
■ Cost: Because the solder is adjusted from the welding rod to the welding ring, and the landing backlash of the solder is used, the cost of the solder is reduced, the raw material cost is saved for the enterprise, and the input cost can be recovered in the short-term after the production.
■ Both stations are protected by nitrogen, the flow of nitrogen in the two stations is separately adjustable, and the flow rate of nitrogen can be adjusted by the flow adjustment switch.
■ Adopt Chinese touch screen to adjust all process parameters of the production process, store and extract the actual output process parameters, and monitor the process parameters at the same time
■ The control system has an alarm device. When the machine fails, the alarm will be issued in time. The error message will be automatically displayed and stored on the machine, and the alarm information can be queried.
■ Machine communication port for easy follow-up machine automation information management

■ Tooling positioning for X, Y, Z three-axis adjustment                        

 

"Note: This machine is a double-station distributor high-frequency welding machine independently developed and produced by our company. It is equipped with water cooling, air cooling and nitrogen protection. The position and direction of the three axes are adjustable, which saves the labor cost for the enterprise. The welding time is more perfect and efficient than the traditional welding.
 
Our company's welding technology in the refrigeration and heating industry has been quite mature. There are a series of schemes and machines for automatic welding of distributors, pipeline parts, four-way valves and other refrigeration HVAC parts. There are double station distributor welding machines, four Through-valve welding machine, pilot valve welding machine, check valve welding machine (chain type), hand-held high-frequency welding machine (on-line welding of pipe parts, etc.) can also be designed according to customer requirements.
 
Some of our customers in the refrigeration and heating industry are: Matsushita Electric, Midea Group, Xi'an Dajin, Nanjing Tianjia, Best Solar.
Induction heating double station automatic welding equipment

Induction heating double station automatic welding equipment introduction:

The high (medium) frequency electric induction heating equipment independently researched and produced by the company is a new technology product completed with international and advanced electronic components and unique technology. It can inductively heat any metal in a non-contact form by penetrating non-metallic substances by the principle of electromagnetic effect.

1: The heating temperature is high. Can melt any metal. Can reach any temperature.

2: Heating speed is fast. There are very few rights layers.

3: High efficiency and energy saving, high energy conversion rate. The power consumption is 1/5 of the old-fashioned tube. The standby state consumes almost no power. And can work 24 hours a day.

4: Automatic control, can adjust the power and time of heating and insulation process. Conducive to improve the repeatability of heating. Simplify the worker's operating skills.

5: Particularly safe, avoiding the risk of electric shock from pressure. Occupational gas, gas and other dangerous gas heating, unknown fire production. More in line with national safety and environmental protection regulations.

6: Small footprint. It is easy to operate and requires no special training. It can be learned in a few minutes.

7: Installation is simple, just power and water. The induction coil can be freely disassembled. Easy to replace.

8: This unit has automatic protection. Water shortage. Undervoltage, overcurrent. The lack of any of the parameters does not meet the requirements. The machine will automatically shut down and no longer work. With higher reliability and stability.

(1) Suitable for any metal heating, the temperature can reach any temperature you want.

(2) Suitable for welding between metal and plastic, such as: speaker net implant. brush. Daily necessities. Eyebrow brush. Electrical switch welding. Stainless steel tube and plastic summer combination.

(3) Welding between metal and metal (same kind. dissimilar metal welding) such as: turning tool. Create a knife, reamer. drill. According to the film, woodworking knives. Abrasives, faucets. Bathroom products, air conditioning tubes, air pipes, tubing. tool. appliance. Antenna, cable box, dispenser. Rhinestones, etc.

(4) Suitable for tempering various metal materials. Annealing, quenching, quenching and tempering, etc., such as: Drinking utensils. stainless steel. Chuck. thimble. Stainless steel appliances. Tool tempering;

(5) Suitable for quenching various metal materials: gears. Cam. Axis class. tool. Tool. Hardware accessories, auto parts. Travel, industrial supplies, daily necessities. Machining, etc.

(6) Hot forging. Hardware workpieces, standard parts. Case. Spare parts, off the ball head, tools. appliance. And other metal heating molding process.

(7) Smelting. gold. silver. Chin, zinc alloy. copper. steel. Metal such as iron is smelted.

Main specifications: 5KW 15KW 20KW 25KW 30KW 40KW 50KW 60KW 80KW 100KW 120KW, 150KW 180KW 200KW can be customized according to the requirements of the user. The company can provide long-term after-sales service for similar products for new and old customers. And provide technical advice.

JYP is a brand of Suzhou Jiyupeng Power Technology Co., Ltd. It has 15 years of research and development production team of induction heating equipment. In 2015, it registered the company in combination with the actual situation at home and abroad. The induction heating equipment developed by the company is: handheld, digital, medium frequency, Ultra-audio, high-frequency induction heating equipment and quenching machine tools, induction heating dedicated sets of thermal equipment. It is widely ...

Copyright 2018~2019 Suzhou Jiyupeng Power Technology Co., Ltd.