Used for automotive air conditioning condenser brazing. Its main features: low cost, high production efficiency, low requirements for operators (no need for professional welding personnel),

Wide application range and high product qualification rate. Brazing is accurate, smooth and reliable; the welding process parameters can be entered, modified and displayed at any time.

The welding process of the brazing machine is automatically controlled, and the operator only needs to load and unload the workpiece, and is suitable for large-volume continuous brazing production of workpieces of different materials such as aluminum, copper, and copper. The equipment is heated by induction heating, the welding temperature is stable and reliable, the brazing time can be adjusted more accurately, and the welding quality is consistent. The machine has high welding efficiency. The control panel adopts a human-machine interface touch screen, which is easy to operate and monitors in real time.

Flexible and convenient output power adjustment, accurate control

The temperature of the heated workpiece is easy to control, so the product quality is stable

Changing the shape of the induction heating ring can heat complex workpieces and local heating

Due to the use of transistor devices and inverter control technology with low loss, the efficiency of the whole machine can reach over 95%, and the energy saving and water saving effects are remarkable.

Small size, light weight, good working environment, no noise and dust

All kinds of protection actions are sensitive, the main components have long service life, the failure rate of collection is low, the performance is reliable, and it can work continuously.

The device can work with water and electricity, easy to operate and easy to maintain.

Induction heating automotive air conditioning condenser brazing machine introduction:

The high (medium) frequency electric induction heating equipment independently researched and produced by the company is a new technology product completed with international and advanced electronic components and unique technology. It can inductively heat any metal in a non-contact form by penetrating non-metallic substances by the principle of electromagnetic effect.

1: The heating temperature is high. Can melt any metal. Can reach any temperature.

2: Heating speed is fast. There are very few rights layers.

3: High efficiency and energy saving, high energy conversion rate. The power consumption is 1/5 of the old-fashioned tube. The standby state consumes almost no power. And can work 24 hours a day.

4: Automatic control, can adjust the power and time of heating and insulation process. Conducive to improve the repeatability of heating. Simplify the worker's operating skills.

5: Particularly safe, avoiding the risk of electric shock from pressure. Occupational gas, gas and other dangerous gas heating, unknown fire production. More in line with national safety and environmental protection regulations.

6: Small footprint. It is easy to operate and requires no special training. It can be learned in a few minutes.

7: Installation is simple, just power and water. The induction coil can be freely disassembled. Easy to replace.

8: This unit has automatic protection. Water shortage. Undervoltage, overcurrent. The lack of any of the parameters does not meet the requirements. The machine will automatically shut down and no longer work. With higher reliability and stability.

(1) Suitable for any metal heating, the temperature can reach any temperature you want.

(2) Suitable for welding between metal and plastic, such as: speaker net implant. brush. Daily necessities. Eyebrow brush. Electrical switch welding. Stainless steel tube and plastic summer combination.

(3) Welding between metal and metal (same kind. dissimilar metal welding) such as: turning tool. Create a knife, reamer. drill. According to the film, woodworking knives. Abrasives, faucets. Bathroom products, air conditioning tubes, air pipes, tubing. tool. appliance. Antenna, cable box, dispenser. Rhinestones, etc.

(4) Suitable for tempering various metal materials. Annealing, quenching, quenching and tempering, etc., such as: Drinking utensils. stainless steel. Chuck. thimble. Stainless steel appliances. Tool tempering;

(5) Suitable for quenching various metal materials: gears. Cam. Axis class. tool. Tool. Hardware accessories, auto parts. Travel, industrial supplies, daily necessities. Machining, etc.

(6) Hot forging. Hardware workpieces, standard parts. Case. Spare parts, off the ball head, tools. appliance. And other metal heating molding process.

(7) Smelting. gold. silver. Chin, zinc alloy. copper. steel. Metal such as iron is smelted.

Main specifications: 5KW 15KW 20KW 25KW 30KW 40KW 50KW 60KW 80KW 100KW 120KW, 150KW 180KW 200KW can be customized according to the requirements of the user. The company can provide long-term after-sales service for similar products for new and old customers. And provide technical advice.